HPLC Solvent Handling Component Accessories
Mac-Mod ACE Semi-Prep Guard Holder (for 10.0/21.2 mm ID Columns)
ACE Semi-Prep Guard Holder (for 10.0/21.2 mm ID Columns)
Waters Corp Waters Solvent Inlet Tubing, Replacement Set, Alliance e2695, HPLC System
This product is a replacement set of four solvent inlet lines designed for use with the Alliance e2695 HPLC System. It includes all necessary components for installation.
- Designed for Alliance e2695 Separations Module
- Suitable for HPLC systems
- Includes four solvent inlet lines (A-D)
- Contains a solvent filter/sinker
- Supplied with a label and connector to the degasser
- Provided as a single package
Medchemexpress LLC GB1107 is a potent, selective, orally active inhibitor, Solid + Solvent 10 mM 1 mL in DMSO ready for reconstitution
GB1107 is a potent, selective, orally active inhibitor of Galectin-3 (Gal-3) with a Kd of 37 nM for human Galectin-3. GB1107 reduces human and mouse lung adenocarcinoma growth and blocks metastasis in the syngeneic model.
Bellco Glass, Inc. 2-P Stainless Steel Sparger Assembly , 8-15L STD Over Head Drive Vessels - Air Stone
2-Port Air Stone Stainless Steel Sparger Assembly is designed for the sparging of gases into the vessel liquid media. This design allows access through the side arms with a screw on cap assembly. Fully autoclavable. MADE IN THE USA. Specifications:Sparger Assembly For 6L L/P OHD VesselFits Thru 45mm Sidearm316L SST Sparger Tube Is 15″ Long With 12mm Glass Frit. Course Porosity 40-60 Microns32 Ra Material Finish Or Better
Foxx Life Sciences UN/DOT Tight Head Containers for Shipping, Transport, Storage, and Waste; 20L (5 Gallon), HDPE, 70mm Cap, UN 3H1, 1/EA
392-2004-OEM: UN/DOT Container 20L HDPE with S70 Cap. 20L HDPE EZwaste UN/DOT System is designed to be an affordable solution for liquid waste disposal. Our containers are made to be tough and durable. They are great for secure shipment and storage of liquid products. The DOT/UN container is available in 13.5L, 20L and 60L. Each comes with a 70S cap. These containers can also be used in other industries including, but not limited to sanitation, chemical, agricultural and food. All raw materials used in our containers meet FDA Standards for food contact. Made from HDPE, meets UN 3H1 Standards.
Optimize Technologies OPTI-SOLV Analytical Solvent Reservoir Filter for 1/16" OD Tubing, 10µm, 5pk
A solid PTFE body keeps the OPTI-SOLV™ filter at the base of the bottle where a bottom-mounted titanium frit provides unrestricted solvent access. As always, Optimize makes installation as simple as possible - no tools or fittings required and includes 5 feet of pre-installed PTFE tubing. OPTI-SOLV™ Reservoir Filters employ a unique conical design inside the filter housing to prevent air bubbles from getting trapped and disturbing your analysis. While the availability of HPLC-grade solvents diminishes the need for pre-filtering, it is still imperative that a filtration device be installed in the reservoir. Placing a filter in the reservoir is an economical way to filter particles that may result from buffer salt precipitation, airborne dust, improperly cleaned glassware, or microbial contamination; none of which are remedied by the use of HPLC-grade solvents.
Optimize Technologies OPTI-MAX Inlet Cartridge Check Valve, 1/8" Ruby Ball & Sapphire Seat, PEEK Cartridge, Varian 2510
Opti-Max™ Cartridge Check Valves are designed to offer maximum performance and ease of use. From the sharp, consistent threads on OPTI-MAX™ custom housings, to the exacting standards used to match ball/seat sets in OPTI-MAX™ cartridges, every aspect of design and manufacturing reflects an unavoidable fact: when it comes to reliable check valve operation, quality and precision make a big difference. OPTI-MAX™ check valves offer many advantages over OEM check valve systems, and are better designed, better made and more reliable than any other after-market check valve product. Additionally, OPTI-MAX™ Free-Turn™ housings can be removed with the tubing still attached, accelerating check valve maintenance while reducing fitting wear.
Grainger EOL Resistor
The Edwards Signaling EOL Resistor is an end-of-line resistor used for fire alarm systems. It has a resistance value of 4.7k ohms and a power rating of 1/4 watt. The resistor has axial leads and measures 0.4" L x 0.2" W. It is RoHS compliant and is made of flame retardant material. The EOL resistor provides supervision of wiring in alarm circuits and signals the panel if the circuit is open. It is compatible with fire panels from Edwards, GE, and EST. The EOL resistor comes in a package of 10.
Alkali Scientific Replacement Sealing Ring, (GL45), 10/cs
Replacement sealing ring (GL45) for Hybexª Media Storage Bottles. Ten per pack.